Exactly how to Troubleshoot and Fix an Electric Water Heater
View MoreThe content following next about What Would Cause My Electric Water Heater to Stop Working? is truly engaging. Don't miss it.
Lots of modern residences use an electric hot water heater for their heater, because of its benefit and ease of use. Nonetheless, similar to any other electrical devices, troubles may emerge with its use, suddenly. It can be really irritating to get up to a cold shower as opposed to a hot one or having your bath with water that isn't warm sufficient or even also hot. Whatever the case might be, water heater troubles can be rather nerve-racking. The good news is, we have actually made a list of feasible options to your water heater concerns. There are a number of factors that might create much of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the issue is, getting it fixed must not pose way too much of an issue if you adhere to these steps:
Examine Your Power Supply:
As basic as this might seem, it is extremely necessary. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power issue. Examine if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the issue, simply transform it on and off again. Replace any damaged or damaged fuse. Examine the home appliance with power after these adjustments to see if it's currently working.
Inspect the Burner in the Water Heater:
If it's not a power trouble, then try looking into your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any one of them. If any of them is defective, change that part and then inspect whether the warm water is back on.
Check Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot enough, you might require to check the temperature setups on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the access panel and press the red button for temperature level reset over the thermostat. This should help heat up the water. Transform the circuit breaker back on as well as examine if the issue has actually been resolved.
Call An Expert:
If after changing all faulty parts as well as resetting your temperature level, the water heater still isn't working, you might require to contact a professional plumber for a specialist viewpoint. The trouble with your heater could be that the hot and cold faucets have actually been switched over or it may be undersized for the amount of hot water required in your house. Whatever the case may be, an expert plumber would certainly aid solve the problem.
Final thought
Hot water heater troubles are not constantly significant. A lot of them are due to minor problems like a blown fuse or damaged burner. Changing the damaged parts should work. Nevertheless, if you are still not able to fix the trouble, give a call to your local plumber ahead to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a serious person who reads on How to Troubleshoot and Repair an Electric Water Heater, I think sharing that excerpt was a good thing. Are you aware of somebody else who is interested by the topic? Why not promote it. Kudos for your time. Kindly come visit our blog back soon.
Click Here!